Securing the Hot’n Shreddy into the GR Large Rack System

The MKG HS Bag uses EXSITING fasteners which connect your rack to your sled :)

  1. Place the bag into the rack

  2. Find the bolt that works for your application which is based on sled type: Skidoo, Polaris, Cat, etc.

  3. Remove the bolt of your choice

  4. Exchange the existing washer with the metal bracket included with your bag

  5. Reinstall the bolt (without the washer) and tension to SNUG, 8-10 ft. lbs.

INstalling the Hot’n Shreddy Bag

The Hot’n Shreddy installation isn’t a difficult process but does require some disassembly and reassembly of your snowmobile with very basic tools. Just take your time.

 Locate your required Instructions

Polaris

Ski-Doo

Arctic Cat & Yamaha

 

Dealer Installation Time: 1 Hour

The Hot’n Shreddy installation is also designed to be completed by a dealer in about an hour, so if you don’t want to take on the project then a dealer can support you with a minimal cost.